Sealcoating Your Asphalt – Good Idea

posted in: Asphalt Blog | 0

Asphalt sealcoating Asphalt pavement, to simplify, is mainly rocks, stone, and gravel, along with a powerful binding agent.  Weather conditions and chemicals break down the adhesive and hence start the deterioration of the asphalt.

To decrease the impacts of these components, it is essential to execute an upkeep program.  This program of sealcoating extends or increases the life expectancy of your parking lot or driveway.

Sealcoating supplies a layer of defense.  As a result, it obstructs water, oil, and UV damage.  Also, sealcoating offers a slip-resistant surface area with a thick black surface that enhances the parking lot or driveway. A frequently set up sealcoating program will more than double the life of the asphalt. Therefore, it saves you substantial dollars down the line.

When using the sealcoating product, follow the directions below.  This will ensure the strongest product.

  • Use a minimum of 2 coats.
  • Temperatures should be a minimum of 50 degrees and increase for not less than 24 hours. Do not use when temperature levels are anticipated below the 50-degree mark.
  • Do not use it if there is impending rain within the same 24-hour duration.
  • Following the seal coat application, allow 24 hours before allowing car traffic back on the surface area.

To sum up, sealcoating every 2 to 3 years will extend the life of your asphalt.  This will be of minimal cost as well.  Applying correctly and correctly timing allows sealcoating to avoid oxidation. Sealcoating stops weather damage, and sealcoating improves pavement.

Share this